TRAINING HAND BOOK

NOTICE

All information including in this publication is based on the latest product information available at the time of

approval from printing

All the illustrations given in this manual may vary from the actual vehicles

TVS MOTOR COMPANY LIMITED reserves the right to make changes at any time without prior notice and

without any obligations what so ever

No parts of this publication should be reproduced without written permission from TVS MOTOR COMPANY

LIMITED

-I-

NTORQ 125

CONTENTS

DESCRIPTION

PAGE NO

View of NTORQ 125

1

Feature of NTORQ 125

2

Technical specification

22

Dimension and weight

22

Engine

22

Transmission

22

Chassis

22

Electrical

23

Capacity

23

Periodic maintance

24

Lubrication schedule

25

Service schedule

25

Electrical system

26

Electrical component

28

Mandatary job in LH & RH jobs

29

Activity

30

-II-

NTORQ 125

TVS NTORQ 125

RIGHT SIDE VIEW

LEFT SIDE VIEW

-01-

NTORQ 125

FEATURES OF TVS NTORQ 125

-02-

.

NTORQ 125

5

2

3

1

1) FULLY DIGITAL SPEEDOMETER - SMART CONNECT -BLUETOOTH CONNECTIVITY

The scooter is fitted with full digital speedometer. This first in class speedometer housing of your scooter.The

speedometer of scooter has a inbuilt bluetooth connectivity through which you can connect your android smart phone

to access features like CALLER ID and SMS notification on speedometer and ride status share last parked location on

your android smart phone.

2) ECONOMETER

Your scooter’s speedometer has an ‘ECONOMETER’ witch indicates weather you are riding in economy

mode or power mode. This is an unique feature of your scooter which guides you to ride your scooter fuel

efficiently

3) ENGINE KILL SWITCH

Engine kill switch is an another unique feature whichh allows to shut the engine without switching OFF the ignition.

HEADLAMP WITH DRL

Your scooter has a brightest Headlamp with multi Focal reflector and halogen

bulb for better visibility. It also has a stylish ‘Day Running Lamp’ Day -DRL at

the bottom

LOW FUEL INDICATOR

‘LOW FUEL INDICATOR’ is yet another unique feature of scooter which

indicates you to refill the fuel when the fuel in tank goes below the minimum

safe level

PETAL DISC BRAKE

Your scooter is fitted with ‘220 mm Roto - Petal Disc’ at the front for effective

braking and safe riding even at higher speeds.

FEATURES OF TVS NTORQ 125

-03-

NTORQ 125

1

1

1) DIAMOND - CUT ALLOY WHEELS

The scooter has sporty diamond cut alloy wheels

2

3

2) PATENTED E-Z CENTRE STAND

‘E-Z Centre Stand’ of your scooter reduces the effort required to place the scooter on stand.

3) TEXTURED FLOORBOARD

Your scooter comes with a stylish textured floor board.

AUTO-CHOKE

The auto-choke helps your scooter start effortlessly even in cold weather

LED TAIL LAMP-CUM -BRAKE LAMP

Your scooter has a ‘LED Tail lamp-cum-brake lamp’for better visibility

and stylish looks.

SMART PHONE CHARGER AND UTILITY BOX LIGHT

Your scooter has a ‘Smart Phone Charger’ enable to charge your mobile phone

when you are travelling. The ‘Utility Box Light’ which lights up the utility box

whenever the seat is open.

FEATURES OF TVS NTORQ 125

Digital speedometer :

1. Economy and power indicator

Eco indicator (green lamp) indicates that the vehicle is running in economy mode which gives better fuel

economy.Power indicator (amber lamp) indicates that the vehicle is running in power mode which results in

reduced fuel economy.This indicator glows only when the engine is ON.

2. High beam indicator lamp ( )

Glows when the head lamp is activated in high beam.

3. Turn signal indicator left ( )

Flashes when the ‘left’ side turn signal indication is activated.

4. Turn signal indicator right ( )

Flashes when the ‘right’ side turn signal indication is activated.

5.Low fuel indication ( )

The low fuel indicator glows when the fuel level reaches to reserve fuel level and a message ‘FUEL ON

RESERVE If the fuel level reaches empty level, the low fuel indicator continues to glow and a message ‘FUEL

’

EMPTY’

6. Smart-connect Notification LED

A green colour LED indicator glows and indicates whenever there is an incoming call or message received by

the ‘Smart Phone’ paired with your TVS NTORQ 125.speeometer

3

4

6

7

1

2

5

8

-04-

NTORQ 125

7. Alpha numeric display

The customized alpha-numeric display indicates different modes of instrument cluster, vehicle information and

smart-connect related messages, when the ignition key is turned ON.

8. Mode and Set buttons

Mode button is used to change the connected instrument cluster display to various modes like ‘Street mode’,

‘Sport mode’, ‘Ride stats mode’ etc.

Set button is used to ‘set’ or ‘erase the stored value’ in various modes.

MODE AND SET BUTTONS :

TVS NTORQ 125’s connected instrument cluster having five modes and their selection and their work explained

below.

1. Street mode

2. Sport mode

3. Ride stats mode

4. BT pair mode

5. Set clock mode

1. Street mode

NTORQ 125

-05-

1a

1i

1b

1c

1e

1d

1f

1g

1h

In street mode, the following features will be displayed on the connected instrument cluster :

1a. Odometer

1b. Clock

1c. Fuel gauge

1d. Speedometer

1e. Engine temperature gauge

1f. Helmet icon

1g. Low battery indicator

1h. Service reminder

1i. Trip A, B and F

1a. Odometer

Odometer registers the total distance covered by the vehicle in kilometer.

1b. Digital clock

Indicates the time in 12 hour format (AM or PM).

1c. Fuel gauge

It indicates the approximate quantity of fuel available in the fuel tank .There are six bars to indicate the quantity of

fuel available in the tank

If all six bar shows means fuel in the tank reaches above 5 litre approximately (Full tank)

When the fuel reaches half tank (3.3 liters approx.) the fuel gauge displays only three bars as shown.

When the fuel reaches minimum safe level (1.5 liters approx.), the last bar of the fuel gauge starts blinking and

low fuel indicator starts glowing. When the fuel reaches minimum safe level (1.5 liters approx.), the last bar of the

fuel gauge starts blinking and low fuel indicator starts glowing. The message ’FUEL ON RESERVE’ will be

displayed at alpha numeric display

If the fuel level goes below minimum safe level (1.1 liters approx.) ‘FUEL EMPTY’ message will be displayed at

alpha numeric display as shown.

-07-

NTORQ 125

1d. Speedometer

Indicates the vehicle speed in kilometer per hour by default when the ignition is turned ON.

1e. Engine temperature gauge

The temperature gauge displays the engine temperature in digital bars. There are six bars to indicate the engine

temperature .If the engine temperature raises beyond normal operating temperature then six bar will indication

and a diagnostic message show as ‘ENGINE WARNING’ in alpha numerical display

1f. Helmet icon

With every ignition ‘ON’, Helmet icon ‘ ‘ blinks for 10 seconds on the left side of the connected instrument

cluster to remind the rider to wear a helmet.

1g. Low battery indicator

An icon with battery symbol ‘ ‘ glows when the battery charge is too low.

1h. Service reminder

If the service is due, whenever the ignition is turned ‘ON’, a icon with spanner symbol ‘ ’ blinks for 10 seconds

after the self-check cycle of connected instrument cluster and continues to glow till the vehicle is serviced and the

reminder is reset.

1i. Trip A and B

In street mode, ‘TRIP A’ will be displayed by default. Press mode button once to enter ‘TRIP B’. To reset any of

the trips (A or B), press the ‘SET’ button more than 3 seconds while display is in the respective trip in vehicle

static condition only

Trip F

This function shows the distance traveled after the low fuel indication symbol ( ) is ‘ON’ and ‘ FUEL ON

RESERVE’ message displayed at alpha numeric display.

The display switches automatically to ‘TRIP F’ once the low fuel indication is ‘ON’ and starts counting from 0.0

km.

-06-

NTORQ 125

2. Sport mode

To enter into sport mode, short press the ‘Mode’ button in street mode while ‘Trip B’ in display.

In sport mode, the following features will be displayed on the connected instrument cluster :

2a. Lap distance

2b. Lap timer

2c. Shortest time indicator

2a. Lap distance

The total distance covered by the vehicle in a particular lap will get captured in ‘Lap distance’ counter. Once the

vehicle speed crosses 2 km/h, the lap distance counter starts counting distance automatically and stops when

the speed goes below 2 km/h. If the speed increases again, the counter continues the distance counting. The lap

distance counter ends when the ignition is turned ‘OFF’.

2b. Lap timer

Lap timer is the total time taken by the vehicle for completing a single lap.

Similar to lap distance, the lap timer also starts once the vehicle speed crosses 2 km/h and stops when the

speed goes below 2 km/h indicated by blinking of lap timer ‘ ‘ icon. The lap timer ends when the ignition is

turned ‘OFF’

2c. Shortest time indicator

Shortest time indicator records the minimum time taken to reach 60 km/h from start. The timer starts once the

vehicle speed crosses 2 km/h and the time will be displayed on crossing 60 km/h speed.

2d

2a

2b

2c

-08-

NTORQ 125

NTORQ 125

NTORQ 125

3. Ride stats mode

To enter into ride stats mode, short press the ‘Mode’ button in sport mode when the vehicle is static.

Following two features are available in ride stats mode.

3.1. Ride stats last lap

3.2. Ride stats best lap

`

3.1. Ride stats last lap

‘RIDE STATS LAST LAP’ appears by default on entering ride stats mode. The details displayed in this mode are

as given below :

3.1a. Previous lap distance

3.1b. Previous lap timer

3.1c. Previous lap average speed

3.1d. Previous lap shortest time

3.1e. Previous lap top speed

3.1a. Previous race lap distance

Previous race lap distance is the total distance covered by the vehicle in the last lap.

3.1b. Previous race lap timer

Previous race lap timer is the total time taken by the vehicle to complete the last lap.

3.1c. Previous race average speed

Previous race average speed is the average speed of vehicle traveled during last lap.

3.1d. Previous race shortest time

Previous race shortest time is the shortest time taken to reach 0 to 60 km/h in the last lap. If there are more than

one record in the same lap, the best value will be displayed.

3.1e. Previous race top speed

Previous race top speed is the top speed that the vehicle has achieved during last lap.

3.2. Ride stats best lap

To enter ‘RIDE STATS BEST LAP’ mode, press ‘MODE’ button once in ‘RIDE STATS LAST LAP’. The details in

this mode are as given below :

3.2a. Best average speed

3.2b. Best lap timer

3.2c. Best lap distance

3.2d. Best top speed

3.2e. Best shortest time

3.1a

3.1b

3.1e

3.1c

3.1d

-09-

NTORQ 125

3.2. Ride stats best lap

3.2a. Best average speed

‘Best average speed’ is the best average speed amongst the previously concluded laps.

3.2b. Best shortest time

‘Best shortest time’ is the shortest time taken ever to reach 0 to 60 km/h speed since the time of

vehicle purchase or since last reset.

3.2c. Best top speed

‘Best top speed’ is the highest speed that the vehicle has reached since the time of vehicle purchase or since last

reset.

3.2d. Best lap distance

‘Best lap distance’ is the total distance covered by the vehicle corresponding to the best ever average speed.

3.2e. Best lap timer

‘Best lap timer’ is the total time taken by the vehicle corresponding to the best ever average speed.

4. BT pair mode

This mode can be entered by pressing ‘MODE’ button for 5 secs from STREET / SPORT mode.

ä

The connected instrument cluster of yourTVS NTORQ 125 can be connected to your Android smart phone via

â

Bluetooth through a TVS NTORQ app which can be downloaded from Google Play.

3.2d

3.2e

3.2c

3.2a

3.2b

-10-

NTORQ 125

5. Set clock mode

To enter the set clock mode, press ‘Mode’ button for more then 5 secs in Bluetooth paring mode. The digital

clock starts blinking once the connected instrument cluster enters the set clock mode.

l Press the ‘Mode’ button while the digital clock is blinking. The hour digits of clock starts blinking and enables

you to change the hours.

l Press the ‘Set’ button to increase the hours while hour digits are blinking.

l On pressing the ‘Mode’ button again the hours gets set and the minute digits starts blinking.

l Now, press the ‘Set’ button to increase the minutes while minute digits are blinking.

l Once again press the ‘Mode’ button so the minutes of the clock is set and the hours format ‘AM’ or ‘PM’

starts blinking.

l Press the ‘Set’ button to change the hour format either to set ‘AM’ or ‘PM’.

l Press the ‘Mode’ button once again to set clock and wait for 5 sec to come out of set clock mode.

TVS NTORQ APP

This smart phone app is available in the Google Play for your TVS NTORQ 125 and it can be installed in your

Android smart phone. This dedicated mobile app of your TVS NTORQ 125 can be downloaded from the Google

Play by searching the key word ‘TVS NTORQ’.

This smart phone app is compatible only for the smart phones with Android OS version Kitkat (4.4) and

above and the Bluetooth version 4.0 and above.

Android and Google Play are trademarks of Google LLC.

Home screen

The home screen of your TVS NTORQ 125’s mobile app has the following icons in it.

1. Profile setting 2. Camera 3. Connect 4. Last parked location 5. Trip report

6. Turn by turn Navigation assist 7. App setting 8. Help

Note

-11-

NTORQ 125

2

6

7

8

1

3

4

5

1. Profile setting

By clicking profile setting ‘ ‘ icon in app, you can customize the profile name in the app. This name will be

automatically synced with your vehicle’s connected instrument cluster on pairing your mobile. The welcome

message will change from ‘HELLO RIDER’ to ‘HELLO (your profile name)’.

Your current location will be updated automatically by third party Map provider when your GPS and mobile data

connection is good or it can be fed in-case of no Internet or GPS connection.

2. Camera

By clicking camera ‘ ‘ icon in app. your smart phone’s camera opens and you can click a picture and set as a

profile picture of your app.

3. Connect

By clicking the connect ‘ ‘ icon in app, you can connect the smart phone with the vehicle’s connected

instrument cluster via Bluetooth.

First time Bluetooth paring

To pair your Android smart phone with your TVS NTORQ 125’s via Bluetooth, for the first time, follow the

procedure as described below :

1 Switch ‘ON’ the vehicle.

2. Change the connected instrument cluster mode to ‘BT pair mode

3. Open the app and long press connect ‘ ‘ icon, ensure the smart phone is near to the vehicle and open

the app.

4. A confirmation dialogue box opens in the app and asks if connection to a new vehicle is to be initiated.

Press ‘YES’ to search.

5. The app searches for all Bluetooth devices nearby and displays the list of devices available.

6. The connected instrument cluster’s Bluetooth name is prefixed by TVS and followed by minimum one

and maximum six alpha-numeric digits. Ex : ‘TVS440’

7. Now, select the ‘TVS440’ in app to initiate the pairing process. The Bluetooth icon ‘ ‘ is connected with

instrument cluster and starts blinking and the alpha-numeric display will display the name of paired mobile

device Ex: ‘PAIRING PHONE’.

8. A Bluetooth pair key will be generated and displayed in your smart phone’s screen. Now accept the

request in app to complete the pairing procedure. On pairing, the alpha-numeric display of connected

instrument cluster displays ‘CONNECTION SUCCESSFUL’ message for 3 secs . Additionally phone’s

battery icon and signal strength icon will be displayed on connected instrument cluster. After successful

connection, inside the app the connect icon color will also illuminate to indicate that you are connected .

Conditions to re-initiate first time pairing:

First time pairing to be repeated if any of bellow conditions occurs:

1. Whenever the battery of the vehicle is disconnected or when the fuse is blown and replaced.

2. When the Bluetooth settings of your smart phone are reset or when the vehicle’s Bluetooth is manually

modified or when ‘factory reset’ is done on your smart phone.

3. Whenever the app is uninstalled or if storage settings of the app is modified or cleared.

4. If the first pair key is missed (consequent pair key requests will appear in your phone within few seconds).

5. When master reset is done on the smart phone.

-12-

NTORQ 125

Auto pairing

Once the first time pairing is done between vehicle’s connected instrument cluster and your smart phone, the

phone will automatically pair with the vehicle when the following conditions are met :

1. Vehicle is switched ‘ON’ and vehicle is near to the smart phone.

2. Smart phone’s Bluetooth is turned ‘ON’

3. First time pairing is ensured.

Every time auto-pairing happens, app will open automatically and connect with the Instrument cluster. The

connected instrument cluster shows ‘CONNECTION SUCCESSFUL’.

If your smart phone is disconnected from the vehicle’s connected instrument cluster then Ex: ‘PHONE

DISCONNECTED’ message will be displayed on the alpha-numeric display of connected instrument cluster.

4. Last parked location

The last parked location of the vehicle, the current location of the user and a route is plotted for user guidance in the

map on clicking the last parked location icon ‘ ‘ of the app, provided the GPS and internet connection is turned

‘ON’; in your smart phone.

The last parked location can be shared by clicking the share icon ‘ ‘.

5. Ride report

By clicking the ride report ‘ ‘ icon, the app opens a screen with ‘Recent trips’ and ‘My favorites’ report.

User can save maximum 10 ride reports in ‘Recent trips’ tab and 10 ride reports in ‘My favorites’ tab. On saving the

11th ride report, the 1st report gets deleted automatically (only in recent ride reports). Click on the ‘last ride details’

tab to view the ride details of your TVS NTORQ 125. Click on a particular ride to view the ride report details like

P

TRIP

-13-

NTORQ 125